• Please do not post any links until you have 3 posts as they will automatically be rejected to prevent SPAM. Many words are also blocked due to being used in SPAM Messages. Thanks!

Recent content by Lazypixel

  1. L

    Want to Sell Thread has been retired.

    Bumpmobile
  2. L

    Custom cpu block V3

    Water didnt fry the chip high vcore and llc did :shok:
  3. L

    Custom cpu block V3

    Thanks lowfat I think that the smoked acrylic would look better if the copper was nickel plated. The impingement slit already runs against the direction of the fins, It wouldnt work any other way would it ? Maybe I didnt get what you were saying :biggrin:
  4. L

    Custom cpu block V3

    Hi guys Heres my third attempt at making a cpu block. Its looking a lot better than my first block I made a couple of years ago :haha: This time the copper and acrylic were cnc machined, the fins were done using a dremel. While testing the block I fried my i7 920:doh:. Ive had no luck...
  5. L

    Home made i7 water block

    temperature #1 in the picture is the ambient temp... :biggrin: 22.3 c
  6. L

    Home made i7 water block

    Just a little update ...Ive decided to change the block and give it a xt look:ph34r: temps look a bit better too :biggrin:
  7. L

    Home made i7 water block

    Ive been meaning to post this pic for a while now. The jig is made of 1/2" mdf and so is the circular offset guide (right bottom corner) that gets attached to the router base Biff you are right about copper being 'sticky' while machined. To prevent that I used a compound that makes things run...
  8. L

    Home made i7 water block

    Chromey all the channels in the block were done with a dremel using a .6mm diamond cutoff wheel
  9. L

    Home made i7 water block

    Thanks for all your comments guys ...heres what I managed to get out of my proc
  10. L

    Home made i7 water block

    1.33vcore for 4.2 ghz no ht...will try later with ht on
  11. L

    Home made i7 water block

    no milling machine was used ... drill press for the mounting holes, router with a 1/4" spiral bit for the block
  12. L

    Home made i7 water block

    Just recently upgraded to an i7 so I thought why not try to make a block for it ...here are some pics and temps after first oc attempt...Im using a pa140.3 with 3 noctua 140mm fans ....all parts were machined by hand using power tools and jigs would appreciate if you could share your temps of...
  13. L

    home made gpu water block

    Here are some pics as promised....a picture is worth a thousand words :biggrin::biggrin:
  14. L

    home made gpu water block

    Ive done some more testing and am still very happy with the results...I will post some more pics of the jigs / bits used for the project so you guys can give this a shot :thumb::thumb:
  15. L

    home made gpu water block

    Finaly some rusults OK so here it is ....after a extremely long leak test of 0 hours and 0 minutes here are some results after playing crysis 15 minutes...... these temps just seem too good to be true :clap::clap::punk::punk: I am glad that I didnt change anything from the original design...

Latest posts

Twitter

Top