• Please do not post any links until you have 3 posts as they will automatically be rejected to prevent SPAM. Many words are also blocked due to being used in SPAM Messages. Thanks!

Search results

  1. KaptCrunch

    GTX 1650 not dtected in BIOS/UEFI

    L0L the lights on nobody home Thanks SS putting us on the right track thought something was odd when went too 1 page an now see Thread starterGregory032 Start dateSep 30, 2019 on post gee what fool i'am
  2. KaptCrunch

    Are Hydro Copper and other OEM water cooled cards worth the cost?

    EK using CPC QDC second that only on disconnect use a paper towel to catch a few drips, stops flowing when separated not shown in video canada
  3. KaptCrunch

    GTX 1650 not dtected in BIOS/UEFI

    time for a newer MB dioscontinued all i find DQ77MK BIOS 0074 strange you say gigabyte lights up wondering if you have a intel MB or Gigabyte
  4. KaptCrunch

    Rants etc.....

    SS sure you didn't order the explosion proof desk lol i drill 1/8 pilot for the 1/4 hole saw pilot sounds you need to use cobolt bits slow speed or use spray bottle filled with water to bits / saw
  5. KaptCrunch

    Rants etc.....

    caveman style (outside of home) 1" pipe and oven mit, heat pipe with propane torch and melt your hole in plastic
  6. KaptCrunch

    3 pin splitter

    first check load of the fans using for some MB fan headers are low wattage if your fans excede that load will burn out fan header. check MB manual if has that info or contact MB support to find out what max load header can take lets say 2 fans loads = 1.6 amps 19.2 watts and MB header...
  7. KaptCrunch

    How to stop speaker feedback?

    try another set of speakers, mite be that ones using voice coils are burnt will do that of what you desribed gurbled hum: grounding issues with power source or bad input cable with no ground feed back check sound properties .... uncheck playthrough speakers
  8. KaptCrunch

    Are Hydro Copper and other OEM water cooled cards worth the cost?

    whats the point of watercooling video cards if only actively doing GPU and forget about VR thats is the heart of video Shippman take notes on VR cooling and spit out a block and prove that active cooling on VR makes a difference
  9. KaptCrunch

    Are Hydro Copper and other OEM water cooled cards worth the cost?

    correct they a part of water block but no water flows to them I'm talking VR here, they are out of the loop as FK say use metal to cool VR an need air flow over it to get max cooling
  10. KaptCrunch

    Are Hydro Copper and other OEM water cooled cards worth the cost?

    odd = off ? that will be the VR on card and there is no water flow directly over them as GPU has flow, so it goes to waterblock material not to rad 2080 VR idles around 91c loaded 117c-121c (VRM package Operating temperature range: -40°C to +125°C ) (correction was F setting on temp...
  11. KaptCrunch

    Are Hydro Copper and other OEM water cooled cards worth the cost?

    yes what happens to radiant heat produced from GPU, will bring case temps up if not removed HeatKiller All The Way
  12. KaptCrunch

    Are Hydro Copper and other OEM water cooled cards worth the cost?

    you still need air flow over the video card for RAM aftermarket block need good hand skills and tools like rest said use a Ref card design takes most headeches away
  13. KaptCrunch

    Rants etc.....

    once you get new KB open old one , with a HB pencil, re- trace the etched tracks on film around your T and E keys . bet works for i'd done that a few times for spilling stuff on KB eats the tracks. while doing this operation i kept contact film dry and separated from rest of KB...
  14. KaptCrunch

    Rants etc.....

    yes seems got my package after a request to CBS office it sat in chicago airport for a month by tracking info
  15. KaptCrunch

    Rants etc.....

    charlie mite be your KB cord the issue
  16. KaptCrunch

    Airflow restrictions / rebuild of external cooler

    issue not enough air change over rad/s I'd cut open a window on inlet and exit cover that matches your rad/fan shouding to window and use alu window screening an paint high glow black many thin coats after making screen coverings. you didn't say wood or metal case wood: staplers and...
  17. KaptCrunch

    Airflow restrictions / rebuild of external cooler

    trip to hardware store and buy alu window screening cut window on intake and same for exit, enough to screw trim outer edge of screen to stay on cover an paint screen gloss black, thin layers per coat. note intake air must be sealed to one side of rad/s and same with exit to other screen...
  18. KaptCrunch

    Airflow restrictions / rebuild of external cooler

    i know nothing about rads , cooling
  19. KaptCrunch

    Airflow restrictions / rebuild of external cooler

    who was billA in watering cooling PC's ? any one know what happened to him! some reading
  20. KaptCrunch

    Airflow restrictions / rebuild of external cooler

    can you show what you have ? so i'm not clued in for a pic is a thousands words are you doing all water cooling in same case or a sister case (outside of main case) stane alone
Top