xentr_theme_editor

  • Please do not post any links until you have 3 posts as they will automatically be rejected to prevent SPAM. Many words are also blocked due to being used in SPAM Messages. Thanks!

Aqua Computer AMPINEL GPU power load balancer

moocow

Well-known member
Joined
Aug 8, 2011
Messages
5,178
Reaction score
1,863
Location
Vancouver, BC
xentr_thread_starter
Per Videocardz reporting, Aqua Computer is releasing a 12V-2x6 load balancing device. It's a hardware based solution that detects and rebalance loads for the 12V-2x6 connectors. It will also have the ability to shut down the GPU. In addition to LED status display, it can also send notification email and messages to smartphone. $79 USD or Euros.

 
Weird, my dual 8 pin requires no additional hardware to know its not going to burn the gpu (or house) :ROFLMAO:

least this will give some comfort to those with the new connector I suppose.
 
Seriously? An ugly giant wart to stick onto your sleep, top-end gpu? 12VHPWR needs to die. Right now.

I slightly prefer the idea of the new motherboard -side power connector, but since they're stupidly standardized it outside of an ITX mobos footprint, its less than ideal either. And obviously, its completely useless for builds that pit the GPU on a riser cable.

If its the adapters that are the problem, I'd honestly go for a compromise I've seen a couple of gpus use: they provide their own adapter, from 12VHPWR adapter to 3x pcie 8pin. And then hide the whole thing.

Example: Sapphire Nitro+ 9070XT1000013988.webp

Which is on this card :

Yes, its 12VHPWR, but since the adapter is provider by the manufacturer, I assume they'd honor their warranty if anything happened while using it. Bonus, the adapter and cables are hidden between the backplate and the passthrough section of the heatsink. Really clean look, AND it can be used in an ITX build!
 
What I see happening long term is the sharp edges of the heatsink fins and the slight vibrations fo the GPU wearing away at the PSU cable sleeving overtime and wearing down into the wire causing even more havoc.
 
xentr_thread_starter
I thought the issue is Nvidia not doing power balancing onboard and the 12VHPWR cables have very little for margins.
 
Back
Top