What's new
  • Please do not post any links until you have 3 posts as they will automatically be rejected to prevent SPAM. Many words are also blocked due to being used in SPAM Messages. Thanks!

CPU voltage not changing

OTZ

Member
Joined
Jan 23, 2008
Messages
6
Location
Aylmer, ON
Ok, so I've had my Q6600 (G0) @ 3GHz on stock voltage (1.27) for about two years now, and I thought that it was about time to go to 3.2 or 3.4 - so I bumped the FSB and the voltage to 1.28 to attempt 3.2. It boots fine, however CPUID and ASUS Probe still show the old voltage setting - 1.27. Running OCCO or Prime shows me errors on CPU1, so it's not stable...even if I change the voltage to 1.3, there's no registered change in any of the hardware monitors (except BIOS).

My mobo is a P5K.

Any thoughts? Am I doing something wrong?
 

gingerbee

Well-known member
Joined
Jan 22, 2009
Messages
7,121
Location
Orillia, Ontario
ya cpu-z is not always 100% right. i would not worry about it at all just check what it says max vcore is at full load
 

Latest posts

Twitter

Top