kungfuevil
New member
- Joined
- Aug 16, 2019
- Messages
- 4
Hello everyone, i registered here in hope of getting some help, or at least a wider perspective.
So let's get to it.
Just recently, i retired my old x58 and i7-920 and the CNPS9900MAX cooler.
Psu (TX650 > RM550), GPU (XFX R9 280X DD > undecided / preferably something with maximum 1x 6pin) and the case (Z11 Neo) of course.
So, basically i am doing a complete build.
There are some criteria though, but i do know that these restrict my options a lot.
And finally my budget for the entire thing is a maximum of 100 dollars.
So here is a list.
-The front has to be ocd friendly, ie NR600 is a no go, because the line isn't on the middle.
-The side has to be windowed, but only tempered glass. Acryl is a no go.
-The psu has to have a full shroud, except for a cutout for the third fan if it supports more than 2.
-Must not support EATX, my tiny b450 ATX would be basically lost in it.
-Must not have colors other than black , white, gray, silver/metal or the combination of these. Unless it's the cause of RGB illumination.
-No odd.
-If the front is mesh, it must not have that honeycomb thingy.
-The closer i get to my price limit, the better included/optional fan ratio i want. (poor people problems).
RGB isn't necessary, the G100M illuminates the entire case, and i can always add a led strip in the future.
That's about it i think.
I am very well aware, that i just discared most case options.
And i am grateful to you for even bothering to read this far.
Any recommendations and help are appreciated.
Thank you in advance.
So let's get to it.
Just recently, i retired my old x58 and i7-920 and the CNPS9900MAX cooler.
Psu (TX650 > RM550), GPU (XFX R9 280X DD > undecided / preferably something with maximum 1x 6pin) and the case (Z11 Neo) of course.
So, basically i am doing a complete build.
There are some criteria though, but i do know that these restrict my options a lot.
And finally my budget for the entire thing is a maximum of 100 dollars.
So here is a list.
-The front has to be ocd friendly, ie NR600 is a no go, because the line isn't on the middle.
-The side has to be windowed, but only tempered glass. Acryl is a no go.
-The psu has to have a full shroud, except for a cutout for the third fan if it supports more than 2.
-Must not support EATX, my tiny b450 ATX would be basically lost in it.
-Must not have colors other than black , white, gray, silver/metal or the combination of these. Unless it's the cause of RGB illumination.
-No odd.
-If the front is mesh, it must not have that honeycomb thingy.
-The closer i get to my price limit, the better included/optional fan ratio i want. (poor people problems).
RGB isn't necessary, the G100M illuminates the entire case, and i can always add a led strip in the future.
That's about it i think.
I am very well aware, that i just discared most case options.
And i am grateful to you for even bothering to read this far.
Any recommendations and help are appreciated.
Thank you in advance.