What's new
  • Please do not post any links until you have 3 posts as they will automatically be rejected to prevent SPAM. Many words are also blocked due to being used in SPAM Messages. Thanks!

H60 fan screws

jtktam

Well-known member
Joined
Jan 9, 2012
Messages
192
Hi guys..

so I got the H60 in silverstone TJ08-e in a pull only config

I want to add a second for a push-pull..

does anybody know what size screws I need to install the second fan?

-joe
 

Silent_Avenger

Well-known member
Joined
Nov 18, 2011
Messages
464
Location
Toronto
If it's the same as the H100 as I assume it would be you'll be looking for #6-32 x 1 1/4" machine screws if you're using standard fans. Of course you'll need longer screws if you are running thicker than usual fans and shorter for thinner fans.
 

jtktam

Well-known member
Joined
Jan 9, 2012
Messages
192
Thanks guys!

I guess the next question would be, is there enough room to mount a second in push-pull on the h60?

-joe
 

techman95

Well-known member
Joined
Jan 25, 2011
Messages
319
Location
TEXAS
yep plenty of room to mount two fans. the rad is the same thickness as the h100 and you can easily do a push pull on that.
 

jtktam

Well-known member
Joined
Jan 9, 2012
Messages
192
mounted the second fan.. ended up jacking two screws from the back fan and installing them on the front fan

temps at 100% drop by 5-8c and returns to idle temp much faster

-joe
 

supaflyx3

Well-known member
Joined
Jun 12, 2010
Messages
2,983
Location
Langley, BC
It seems i may be a little late, but what i did with my H50 in push pull is use 2 screws on each fan so i didn't have to get more screws.
 

jtktam

Well-known member
Joined
Jan 9, 2012
Messages
192
It seems i may be a little late, but what i did with my H50 in push pull is use 2 screws on each fan so i didn't have to get more screws.
yeah, that's what I did.. but when I have time I will get more screws just in case..

wonder if home depot or crappy tire have these screws?

-joe
 

Pabz0r545

Well-known member
Joined
Sep 15, 2011
Messages
1,297
Location
Edmonton, AB
Wow that is quite the temp difference. When I had a push pull on mine it only dropped by 1 or 2 degrees.

Home depot does in fact sell them but they only offer the silver ones last time I checked. :(
Crappy tire should carry them too.
 

Latest posts

Twitter

Top