High tension for tightening the blade up to 30,000 psi
Cushion grip handle for better control and comfort
Magnetic blade storage inside frame
Cast aluminium construction for durability. Cushion grips at each end for comfort and safety. The Nicholson Professional 4 in 1 Hacksaw Frame is a high quality, lightweight high tension hacksaw frame designed for the professional and serious user that offers four different cutting options for greater flexibility. When you're working away from the workshop this represents true value. It is hard to get excited about a hacksaw, but the Nicholson four functions is different and worth a look. With the far end folded back into the frame the blade can be mounted diagonally forming a high access hacksaw for cutting in restricted areas. Last but by no means least the design allows you to fit a sabre saw blade to the end of the frame, limiting cutting potential only to the variety of sabre saw blades in your possession. There is storage for two to three blades in the frame. 300mm blade.
That hacksaw is awesome! Certainly beats the rusted out frame I've had kicking around for the past 15 years. But it's $55 on the .ca equivalent. Still likely worth it though.
I find myself using a short throw hacksaw blade for my jigsaw more than manual blades these days. You have to hunt around for a good blade manufacturer since most of them are crap, but their out there.
I was told about 3M Scotch 233+ Green tape by local Automotive paint supplier. I had to cut a window in a Lian Li full tower, and wanted a masking tape with really strong adhesion, but didn't leave glue-like residue. It's been used in majority of my own projects and modding guides since*
With Holidays approaching, I started thinking about what Tools I needed and recalled this thread. I always liked the look of the Romaxx CNC Routers after Craig started using one. You can make your own PC case, custom windows and fan or radiator grills.
HS-1, $2,490 Store | Romaxx CNC Router Systems
Travel 12.1" X-Axis - 19.6" Y-Axis - 3" Z-Axis
*Rapids 1200 X-Axis - 1200 Y-Axis - 140 Z-Axis
Cutting Speeds (straight lines) 1200 ipm X-Axis - 1200 ipm Y-Axis -140 ipm Z-Axis
*Cutting Speeds (arcs/curves) 300-400 ipm X-Axis and Y-Axis - 140 ipmZ-Axis
Largest Workpiece any Length by 14 wide by 4.4 tall
Voltage: 110 vac or 220 by request
Hardware Canucks is focused in-depth reviews of the the latest graphics cards, CPUs, storage, smartphones, notebooks and gaming peripherals. Join us as we unbox, review and benchmark the best computer hardware on the market.