What's new
  • Please do not post any links until you have 3 posts as they will automatically be rejected to prevent SPAM. Many words are also blocked due to being used in SPAM Messages. Thanks!

Patriot Pyro 120GB SSD Review

Status
Not open for further replies.

AkG

Well-known member
Joined
Oct 24, 2007
Messages
5,274
When it was first introduced, SandForce’s new SF2281 controller was used with great results in exclusively high end SSDs. Things have quickly changed though as the market began looking for lower priced drives which still offer decent performance numbers.

Along with many other companies Patriot has now planted their own flag in the budget friendly SF2281 market after catering to enthusiasts with their Wildfire SSDs. The new Pyro series retains the same genes as many cutting edge drives but implements more cost effective NAND to ensure that it hits a lower price point. In this review we will be looking at the Pyro 120GB which is officially launching today for a price of $210.


With a cost of $210 the Pyro is up against some pretty fierce competition. The similarly performing Corsair Force 3 120GB can currently be found for $199 (and sometimes less) while OCZ’s previous generation flagship –the Vertex 2- hovers around the $185 mark.

Unfortunately, Patriot’s new drive doesn’t exactly start off on level footing since it doesn’t include a 2.5” to 3.5” drive adapter. If a modern computer case is being used, it will likely support 2.5” drives but there are many older cases that completely lack any 2.5” mounting locations. Most of Patriot’s competitors have seen fit to include one of these inexpensive brackets and this potential limitation should be considered when looking at the Pyro.


With an MSRP which firmly places it the upper range of the mid-grade SF2281 niche, it comes as no surprise that the Patriot Pyro 120GB’s interior architecture is very similar to that of the Corsair Force 3 120GB. Both have the same PCB with all 16 IC spots populated with 8GB (64 gigabit), single bank NAND modules. There is also an SF2281 controller chip nestled in its own space on the PCB.


Due to the price bracket which the Pyro finds itself in, Patriot went with 25nm 29F64G08CBAAA ONFi 1.0 chips rather than the higher performance and more costly Toggle Mode 1.0 NAND used on their flagship “Wildfire” drive. The ONFi 2 found in SSDs like the Corsair Force GT 120GB was also avoided. These decisions allowed for a more reasonable asking price and a broader market appeal, but there will be some trade-offs in performance. The real question is whether or not the reduction in performance can be offset by the Pyro's lower price.
 
Last edited by a moderator:

AkG

Well-known member
Joined
Oct 24, 2007
Messages
5,274
Introducing the SandForce SF2000 Family

Introducing the SandForce SF2000 Family




As you are probably well aware by now, there are actually many different models which make up the next generation of SandForce controllers. Much like Intel’s socket 1155 i3/i5/i7 series of processors, all these different SandForce numbers represent slightly different tweaks and features, but all are basically built upon the same SF2000 foundation.

In grand total there are eight SF2000 iterations, but for the most part we won't see most of them in the retail channel. Take for example the SF2141; this is a cut down 4 channel, 24bit RS ECC, SATA 3GB/s controller which probably wont see much fan fare outside of truly budget SSDs. The easiest way to think about this one is to consider it the low end of SF2000 drives. Stepping up a level to 8 channels (and 55bit BCH ECC) but still SATA 3GB/s only is the SF2181 which you can consider the mid range of this generation. This one will probably be featured in more mid-tier next generation SSDs as it has better error correction abilities, yet cannot directly compete with the true stars of the SF200 consumer line: the SF 2281.

The only difference between the two “real” consumer grade SF2000 SATA 6G controllers most likely to be seen (the SF2281 and SF2282) is the one -the 2282- is only for extra large 512GB and higher drives (though the SF2281 can handle 512GB of NAND) and is a larger chip. These are the two flagship products as such have received all the features and all the tweaks which are going to become synonymous with the SF2000 consumer class controllers.

The other four controllers are for enterprise environments and boast features such as eMLC compatibility, Military Erase, SAS and super capacitor capabilities.


Features




The SF2000 controller series is built upon the same architecture as the original SF1000 series. You get DuraWrite, RAISE and all the other features but these have all undergone enhancements and tweaking.



The original SF1000 series had ECC of 24bits per 512byte sector of ECC; whereas the new controller has 55bits. The type of ECC has changed as well. The original used the more simplistic Reed-Solomon (aka “RS”) ECC code which is probably best known from its use in CDs.



Compare and contrast this with the fact that the new controller uses Bose-Chaudhuri-Hocquenghem (aka “BCH”) for its ECC code; which is a more elegant version that targets individual errors. It is also faster and easier for the controller to correct these errors making for a lowered performance impact. AES encryption has also doubled from 128 to 256


The most important of these new features for consumers is of course the new SATA 6Gb/s capabilities. This larger bus instantly translates into much higher sequential performance. The second generation of flagship SandForce controllers has also received a boost on the small file performance end of things thanks in no small part to a 20% increase in IOPS. The first generation SF1200 was rated for up to 50,000 IOPS whereas the new controller family has a rating of 60,000 IOPS.

The other interesting feature which all but the most basic of the SF2000 models boast is SLC NAND abilities. In the past, a manufacturer had to step up the enterprise SF1500 to get SLC compatibility but now they don't have to. Add in lowered power consumption and you can see that while the SF2000 series builds upon the same basic foundation as the previous generation, they are not all that similar when you take a closer look.
 
Last edited by a moderator:

AkG

Well-known member
Joined
Oct 24, 2007
Messages
5,274
A Look at DuraWrite, RAISE and More

A Look at DuraWrite, RAISE and More



Let’s start with the white elephant in the room and explain why this 120GB drive is in reality a 120GB drive. The Pyro has sixteen 8GB NAND chips onboard which gives it a capacity of 128GB, but is seen by the OS as 120GB. Manufacturers use this to help increase IOPS performance and also extend life via wear leveling (as there are always free cells even when the drive is reported as “full”) and even durability since the drive has cells in reserve it can reassign sectors to as the “older” cells die. While 8GB worth of cells set aside for a SandForce drive is not that much compared to some previous models, this is still a lot of space.



As we said, over-provisioning is usually for wear leveling and ITGC as it gives the controller extra cells to work with for keeping all the cells at about the same level of wear. However, this is actually not the main reason SandForce sets aside so much. Wear leveling is at best a secondary reason or even just a “bonus” as this over-provisioning is mainly for the Durawrite and RAISE technology.

Unlike other solid state drives which do not compress the data that is written to them, the SandForce controller does real time loss-less compression. The upside to this is not only smaller lookup tables (and thus no need for off chip cache) but also means less writes will occur to the cells. Lowering how much data is written means that less cells have to be used to perform a given task and this should also result in longer life and even fewer controller cycles being taken up with internal house cleaning (via TRIM or ITGC).



Longevity may be a nice side effect but the real purpose of this compression is so the controller has to use fewer cells to store a given amount of data and thus has to read from fewer cells than any other drive out there (SandForce claims only .5x is written on average). The benefit to this is even at the NAND level storage itself is the bottleneck for any controller and no matter how fast the NAND is, the controller is faster. Cycles are wasted in waiting for data retrieval and if you can reduce the number of cycles wasted, the faster an SSD will be.

Compressing data and thus hopefully getting a nice little speed boost is all well and fine but as anyone who has ever lost data to corruption in a compressed file knows, reliability is much more important. Compressing data means that any potential loss to a bad or dying cell (or cells) will be magnified on these drives so SandForce needed to ensure that the data was kept as secure as possible. While all drives use ECC, to further ensure data protection SandForce implemented another layer of security.



Data protection is where RAISE (Redundant Array of Independent Silicon Elements) comes into the equation. All modern SSDs use various error correction concepts such as ECC. This is because as with any mass produced item there are going to be bad cells while even good cells are going to die off as time goes by. Yet data cannot be lost or the end user’s experience will go from positive to negative. SandForce likes to compare RAISE to that of RAID 5, but unlike RAID 5 which uses a parity stripe, RAISE does not. SandForce does not explicitly say how it does what it does, but what they do say is on top of ECC, redundant data is striped across the array. However, since it is NOT parity data there is no added overheard incurred by calculating the parity stripe.



According to SandForce’s documentation, not only individual bits or even pages of data can be recovered but entire BLOCKS of data can be as well. So if a cell dies or passes on bad data, the controller can compensate, pass on GOOD data, mark the cell as defective and if necessary swap out the entire block for a spare from the over-provisioning area. As we said, SandForce does not get into the nitty-gritty details of how DuraWrite or RAISE works, but the fact that it CAN do all this means that it most likely is writing a hash table along with the data.

SandForce is so sure of their controller abilities that they state the chances of data corruption are not only lower than that of other manufactures’ drives, but actually approaches ZERO chance of data corruption. This is a very bold statement, but only time will tell if their estimates are correct. In the mean time, we are willing to give the benefit of the doubt and say that at the very least data corruption is as unlikely with one of these products as it is on any modern MLC drive.
 
Last edited by a moderator:

AkG

Well-known member
Joined
Oct 24, 2007
Messages
5,274
Testing Methodology

Testing Methodology


Testing a drive is not as simple as putting together a bunch of files, dragging them onto folder on the drive in Windows and using a stopwatch to time how long the transfer takes. Rather, there are factors such as read / write speed and data burst speed to take into account. There is also the SATA controller on your motherboard and how well it works with SSDs & HDDs to think about as well. For best results you really need a dedicated hardware RAID controller w/ dedicated RAM for drives to shine. Unfortunately, most people do not have the time, inclination or monetary funds to do this. For this reason our testbed will be a more standard motherboard with no mods or high end gear added to it. This is to help replicate what you the end user’s experience will be like.

Even when the hardware issues are taken care of the software itself will have a negative or positive impact on the results. As with the hardware end of things, to obtain the absolute best results you do need to tweak your OS setup; however, just like with the hardware solution most people are not going to do this. For this reason our standard OS setup is used. However, except for the Vista load test times we have done our best to eliminate this issue by having the drive tested as a secondary drive. With the main drive being a Phoneix Pro 120GB Solid State Drive.

For synthetic tests we used a combination of ATTO Disk Benchmark, HDTach, HD Tune, Crystal Disk Benchmark, IOMeter, AS-SSD and PCMark Vanatage.

For real world benchmarks we timed how long a single 10GB rar file took to copy to and then from the devices. We also used 10gb of small files (from 100kb to 200MB) with a total 12,000 files in 400 subfolders.


For all testing a Asus P8P67 Deluxe motherboard was used, running Windows 7 64bit Ultimate edition (or Vista for boot time test). All drives were tested using AHCI mode using Intel RST 10 drivers.

All tests were run 4 times and average results are represented.

In between each test suite runs (with the exception being IOMeter which was done after every run) the drives are cleaned with either HDDerase, SaniErase or OCZ SSDToolbox and then quick formatted to make sure that they were in optimum condition for the next test suite.


Processor: Core i5 2400
Motherboard: Asus P8P67 Deluxe
Memory: 8GB Mushkin DDR3 1300
Graphics card: Asus 5550 passive
Hard Drive: 1x Seagate 3TB XT, OCZ 120GB RevoDrive
Power Supply: XFX 850


SSD FIRMWARE (unless otherwise noted):

OCZ Vertex: 1.6
OCZ Vertex 2 100GB: 1.33
Mushkin Callisto Deluxe 40GB: 3.4.0
Corsair Force F90: 2.0
OCZ Vertex 3 240GB: 1.11
Crucial C300 128GB: 006
Corsair Force 3 GT 120GB: 1.2
Corsair Force 3 120GB: 1.2
Patriot Pyro 120GB: 3.1.9
 
Last edited by a moderator:

AkG

Well-known member
Joined
Oct 24, 2007
Messages
5,274
Read Bandwidth / Write Performance

Read Bandwidth


For this benchmark, HDTach was used. It shows the potential read speed which you are likely to experience with these hard drives. The long test was run to give a slightly more accurate picture. We don’t put much stock in Burst speed readings and thus we no longer included it. The most important number is the Average Speed number. This number will tell you what to expect from a given drive in normal, day to day operations. The higher the average the faster your entire system will seem.



As expected the sequential read speed of the Patriot Pyro 120GB is very respectable. In fact, if you are used to what a mere hard drive can do the use of ONFi 1.0 NAND is a non-issue. In sequential reads ONFi 1 NAND provides more than enough bandwidth performance to satisfy first time SSD consumers.


Write Performance


For this benchmark HD Tune Pro was used. To run the write benchmark on a drive, you must first remove all partitions from that drive and then and only then will it allow you to run this test. Unlike some other benchmarking utilities the HD Tune Pro writes across the full area of the drive, thus it easily shows any weakness a drive may have.



As with reads, ONFi 1.0 NAND is not a large issue when it comes to sequential tasks; be they read or write in nature. The Pyro is very fast and can easily outpace any last generation MLC based SSD. While the average write speed is slightly lower than that of the Corsair Force 3 120GB, this minor variance is well within the margin of error and could easily be to one batch of NAND being slightly faster or slower than another.
 
Last edited by a moderator:

AkG

Well-known member
Joined
Oct 24, 2007
Messages
5,274
ATTO Disk Benchmark

ATTO Disk Benchmark


The ATTO disk benchmark tests the drives read and write speeds using gradually larger size files. For these tests, the ATTO program was set to run from its smallest to largest value (.5KB to 8192KB) and the total length was set to 256MB. The test program then spits out an extrapolated performance figure in megabytes per second.





Once again we are seeing very respectable power curves. As we have stated in the past, ATTO uses easily compressible data so any and all bottlenecking at the NAND level is effectively masked by that powerful SandForce controller. In other words, under optimum conditions the Pyro is not only more than adequate it can be considered down right powerful for consumers looking for a newer and faster solid state drive.
 
Last edited by a moderator:

AkG

Well-known member
Joined
Oct 24, 2007
Messages
5,274
Crystal DiskMark / PCMark Vantage

Crystal DiskMark


Crystal DiskMark is designed to quickly test the performance of your hard drives. Currently, the program allows to measure sequential and random read/write speeds; and allows you to set the number of tests iterations to run. We left the number of tests at 5 and size at 100MB.





When the data used in the testing suite goes from easily compressible to incompressible we do see a marked decrease in performance. These numbers are more than adequate for first time users, but if you are a power user who deals mainly with data already in a compressed format (video or audio encodes for example) the Pyro may not be your best option. It is also noteworthy that our earlier supposition of the batch of NAND inside the Pyro has slightly different characteristics than the Force 3’s is bearing fruit. This particular drive is ever so slightly faster on reads and slightly slower on writes.


PCMark Vantage


While there are numerous suites of tests that make up PCMark Vantage, only one is pertinent: the HDD Suite. The HDD Suite consists of 8 tests that try and replicate real world drive usage. Everything from how long a simulated virus scan takes to complete, to MS Vista start up time to game load time is tested in these 8 core tests; however we do not consider this anything other than just another suite of synthetic tests. For this reason, while each test is scored individually we have opted to include only the overall score.



While the overall average is slightly lower than that of Corsair Force 3, we consider this to be a tie.
 
Last edited by a moderator:

AkG

Well-known member
Joined
Oct 24, 2007
Messages
5,274
AS-SSD / Access Time

AS-SSD


AS-SSD is designed to quickly test the performance of your drives. Currently, the program allows to measure sequential and small 4K read/write speeds as well as 4K file speed at a queue depth of 6. While its primary goal is to accurately test Solid State Drives, it does equally well on all storage mediums it just takes longer to run each test as each test reads or writes 1GB of data.





As with Crystal DiskMark, AS-SSD’s results are based on incompressible data patterns and thus can be considered a “worst case scenario” for the Pyro. For a worst case scenario, these results are more than good enough for its intended consumer niche and we doubt any first time SSD buyer will be anything but impressed with the power this drive affords them. Even when pitted against Western Digital's venerable VelociRaptor, the Pyro is simply in a different league.


Access Time


To obtain an accurate reading on the read and write latency of a given drive, AS-SSD was used for this benchmark. A low number means that the drive’ data can be accessed quickly while a high number means that more time is taken trying to access different parts of the drive.



As expected the access time is very decent, and can be considered down right fast compared to many other drives.
 
Last edited by a moderator:

AkG

Well-known member
Joined
Oct 24, 2007
Messages
5,274
Anvil Storage Utilities Pro

Anvil Storage Utilities Pro


Much like AS-SSD, Anvil Pro was created to quickly and easily – yet accurately – test your drives. While it is still in the Beta stages it is a versatile and powerful little program. Currently it can test numerous read / write scenarios but two in particular stand out for us: 4K que depth of 4 and 4K que depth of 16. A que depth of four along with 4K sectors can be equated to what most users will experience in an OS scenario while 16 depth will be encountered only by power users and the like. We have also included the 4k que depth 1 results to help put these two other numbers in their proper perspective. All settings were left in their default states and the test size was set to 1GB.





Once again the numbers the Patriot Pyro 120GB posts in this new synthetic test are very decent. Naturally, they aren't in the same ballpark as the larger 240GB SF2281 drives, but they are none the less very respectable for a more limited investment.
 
Last edited by a moderator:

AkG

Well-known member
Joined
Oct 24, 2007
Messages
5,274
IOMETER

IOMETER


IOMeter is heavily weighted towards the server end of things, and since we here at HWC are more End User centric we will be setting and judging the results of IOMeter a little bit differently than most. To test each drive we ran 5 test runs per HDD (1,4,16,64,128 que depth) each test having 8 parts, each part lasting 10 min w/ an additional 20 second ramp up. The 8 subparts were set to run 100% random, 80% read 20% write; testing 512b, 1k, 2k,4k,8k,16k,3xk,64k size chunks of data. When each test is finished IOMeter spits out a report, in that reports each of the 8 subtests are given a score in I/Os per second. We then take these 8 numbers add them together and divide by 8. This gives us an average score for that particular que depth that is heavily weighted for single user environments.



Unless you look very, very, very closely you will not be able to see the Corsair Force 3 120GB's dotted line since the Patriot Pyro's results mirror it. While there was a small variation between these two drives at the different que depths, these differences are minor at best.

The Pyro 120GB seems to perform quite well here but it is bottlenecked by the ONFi 1.0 NAND. For most consumers in a non-server environment the difference between it and higher end choices will be minimal at best in most day to day tasks.
 
Last edited by a moderator:
Status
Not open for further replies.
Top