2 or 3 weeks ago, I decided to put a 3rd independant loop in my system, and put drain lines on each loops for easier drain/flash/rinse routine. Here's my first ''modding'' ever lol!
I bought a 114mm (4'' 1/2) hole saw to mod my MM top panel to put another MCR320. I used a drill press with some W40 on the blade, and 5/32 bit for the screw holes. Here's the result.
Here's the 3 S-Flex G with 38mm ''shroud'' (cheap 38mm fan with blades and motor cut out) on the MCR320.
And finally in place on top of the MM.
Still have alot of wire management to do, but now the 5970 and the 5870 each have their own loop. The 5970 with 2X MCR320 and the 5870 with 1X MCR320. My next step is to replace the 25mm ''shrouds'' for the fans on the 2 MCR320 for the 5970 with 38mm ''shrouds''. But I don't have time for now. Too busy.
One last shot with the new MCR320 in place on the top panel of the MM.
I know I know. It's a mess in there. But temps are crazy low, almost ambient (less then a delta 5 ) even on heavy load, with the GPUs OCed to 1000/1200 and the CPU at 4.0.
I will try to redo my tubing the next time, and hide all those cables. But for now the system is fully operational, stable, and leak free.
