What's new
  • Please do not post any links until you have 3 posts as they will automatically be rejected to prevent SPAM. Many words are also blocked due to being used in SPAM Messages. Thanks!

Scythe Ninja Plus Rev. B

BALISTX

Well-known member
Joined
Feb 12, 2007
Messages
2,041
Location
Ottawa, ON
Will the Ninja Plus Rev. B be tall enough not to interfere with using the first ram slot on a DFI LANParty UT Ultra-D?
 
Joined
Apr 15, 2007
Messages
19
Location
Vancouver
I just intalled one on a Sapphire ATI Crossfire mobo. *EDIT* The fins do clear the ram slots 1 & 2 ...(I'm not sure if a ram stick could fit in slot 1). The fins partly blocks the cpu fan connector (between the fins and the blue ram sockets is the beige thingy) and the 8 pin 12V power connector (thick black cable at the top of the Noctua case fan). Also if I install a fan (a Antec P150 case), the frame of the fan will be touching and pushing down on the ram in slots 3 & 4. I've left the fan off for now and the temps are the same as before on a socket 939 3700+.
 

Attachments

  • CIMG0426.jpg
    CIMG0426.jpg
    200.3 KB · Views: 17,411
  • CIMG0427.jpg
    CIMG0427.jpg
    156.7 KB · Views: 11,797
Last edited:

enaberif

Well-known member
Joined
Dec 9, 2006
Messages
11,370
Location
Calgahree, AB
If you add the fan to the ninja you lose the 1st slot on a lot of boards including my asrock 478 board and a intel bx2 board.
 
Top