What's new
  • Please do not post any links until you have 3 posts as they will automatically be rejected to prevent SPAM. Many words are also blocked due to being used in SPAM Messages. Thanks!

tell me will be ok.

Bungwirez

Well-known member
Joined
Feb 20, 2012
Messages
465
Location
Mississauga
asus m4ez 2600K all stock clocks. bios 1004
been rock solid for months and months.
had one BSOD yesterday that caused my OS drive to disappear in bios.
clear CMOS returned the SSD to the boot list and everythin was good.

today I was doing a little browsing, then left for errands, leaving my PC as I often do in idle state....
btw no hiberation or sleep states enabled.
so I come home and find everything power on, fans spinning pumps pumpin but no video signal.

I look at the LED it says "00"
clear CMOS ...nothing
MemGo... nothing
Q button cuts the power as it should, but still same error.
switched to secondary bios still nothing.
everything is attached and plugs are checking out.
entire system is underwater and been cool as cucumber.
Am I pouched? or is there something I can do to fix this?
 

SKYMTL

HardwareCanuck Review Editor
Staff member
Joined
Feb 26, 2007
Messages
13,410
Location
Montreal
Try removing memory DIMMS one at a time. Essentially, force the CPU to boot in single channel mode.

Also, are you running off of the internal or external graphics?
 

Bungwirez

Well-known member
Joined
Feb 20, 2012
Messages
465
Location
Mississauga
its good that I had planned to tear it all down to add the Mayhem Aurora.

fun times. thanks for the help guys
 

Latest posts

Twitter

Top