xentr_theme_editor

  • Please do not post any links until you have 3 posts as they will automatically be rejected to prevent SPAM. Many words are also blocked due to being used in SPAM Messages. Thanks!

Completed GUREN KNIGHTMARE HAF X - first watercooling build

xentr_thread_starter
Very nice looking set up. What are your temperatures like?

thank you :biggrin:
cpu 30° C in idle 50-55° C full
gpu1-gpu2 29-27° C idle 39-37° C full


nice build but the rez pics are showing bubbles in rez

these bubbles still present today ? and video shows something and the rez tub not to clearly for the reflections. is it clear or camera glare

the bubbles are gone, i've take the photos when i've just finish to fill the loop, so there were some bubbles and air in.
for the video i think it's camera glare
 
Very nice build you got there. I'm not a big fan of external radiator setups either, but you sure pulled it off. :thumb:

Your video is very static in that it's just one plain continuous shot. But at least you picked good tunes. You must see In Flames play live if you haven't already :punk:
 
wow that's a lot of rad capacity! does the extra 240 on top make much of a difference to your temps? i imagine the 360 on the inside and the rear external rad would be enough :\

nevertheless, very sexy rig, mate! :D
 
xentr_thread_starter
thank you guys! :)
yes the additional radiator help to control the water temp. under full load.


Meanwhile i've made some minor modification :biggrin: :

- switched from the RX240 to te RX480 on the top of the case
- added some Koolance VL3N quick disconnects on the external radiators, they are now full modular
- replaced the fittings under the GPUs and the ball valve with a Bitspower one.
- now i'm using Mayhems Pastel fluid.

i've also replaced my old power supply (noisy under load, tagan bz900) with a Seasonic 1000 Platinum

some photos :clap:

DSC_0134.jpg


DSC_0035.jpg


DSC_0078.jpg


DSC_0085.jpg


DSC_0066.jpg


i162896_dsc-0094.jpg









 
xentr_thread_starter
Back
Top