System Light Dark

xentr_theme_editor

xentr_page_setup xentr_appearance xentr_sidebar

  • xentr_page_width

    xentr_toggle_page_width

    xentr_page_width_description

    xentr_color_pickers

    xentr_toggle_color_picker

    xentr_toggle_color_picker_description

    xentr_typography

    xentr_select_the_font_you_want_to_use

    xentr_node_layout

    xentr_grid_layout

    xentr_grid_layout_description

  • Style variation

    xentr_select_the_style_variation_you_want_to_use
    System Light Dark

  • xentr_sidebar

    xentr_toggles_sidebar

    xentr_sidebar_description

    xentr_sticky_sidebar

    xentr_sticky_sidebar_description
    xentr_sidebar_position
    Left
    Right
  • Please do not post any links until you have 3 posts as they will automatically be rejected to prevent SPAM. Many words are also blocked due to being used in SPAM Messages. Thanks!

First Watercooling Build

My Treibwerk fans are almost silent to me , also the 360 will only be doing the motherboard , but I think you understand now that I am pulling the air up from the bottom of the 800d through the rads and out , as soon as Daz gets my chipset block in I will start pulling everything out ot my Antec 1200 and building it in the corsair (can hardly wait)
 
Just the beginning
 

Attachments

  • Water Cooling 1 005.webp
    Water Cooling 1 005.webp
    98.9 KB · Views: 78
  • Water Cooling 1 009.webp
    Water Cooling 1 009.webp
    136.1 KB · Views: 84
xentr_thread_starter
MarkOne said:
witch one the EK 100 ... it will look to small on the obsidian, take the 250 , I know I order a 150 and it was too small, I have to order a longer tube

EK-Multioption RES 250 multioption EK watercooling loop compensating reservoir [EK-Multioption RES 250] - $45.99 : DazMode, Watercooling enthusiasts store

.
Click to expand...
This is the one I was looking at after you said the EK100 was too small...

[FONT=Verdana, Arial, Helvetica, sans-serif]Ek Water Blocks EK-BAY Spin 5.25IN Bay Reservoir with Flow Meter & Waterfall - Acetal
( NCIX.com - Buy Ek Water Blocks EK-BAY Spin 5.25IN Bay Reservoir with Flow Meter & Waterfall - Acetal - 3830046994233 In Canada. )[/FONT]
 
MarkOne said:
do you have the 88 cfm or the lower one ?
Click to expand...
I have the 121 's right now but I will probably order the 122's before I build , I did a lot of searching and because of the body design these should work very well plus I havent seen any other fans with this low sound ratings to cfm output .
 
scruff said:
I have the 121 's right now but I will probably order the 122's before I build , I did a lot of searching and because of the body design these should work very well plus I havent seen any other fans with this low sound ratings to cfm output .
Click to expand...

ok your run at 1200 rpm and mine a 1800, that explain the difference in the noise, I have to buy a fan controler for them, or i will plug them on the motherboard
 
I have ordered the Rheobus 6 fan controller from Daz for now ,I think it will be a better bet than the motherboard connections . Did you run the fans mounted on the rad or loose ?
 
You must log in or register to reply here.

Latest posts

xentr_legal_notice_title

xentr_legal_notice_description

Back
Top