System Light Dark

xentr_theme_editor

xentr_page_setup xentr_appearance xentr_sidebar

  • xentr_page_width

    xentr_toggle_page_width

    xentr_page_width_description

    xentr_color_pickers

    xentr_toggle_color_picker

    xentr_toggle_color_picker_description

    xentr_typography

    xentr_select_the_font_you_want_to_use

    xentr_node_layout

    xentr_grid_layout

    xentr_grid_layout_description

  • Style variation

    xentr_select_the_style_variation_you_want_to_use
    System Light Dark

  • xentr_sidebar

    xentr_toggles_sidebar

    xentr_sidebar_description

    xentr_sticky_sidebar

    xentr_sticky_sidebar_description
    xentr_sidebar_position
    Left
    Right
  • Please do not post any links until you have 3 posts as they will automatically be rejected to prevent SPAM. Many words are also blocked due to being used in SPAM Messages. Thanks!

Thermalright Ultra 120 Extreme, 2x Noctua P12's and A/C MX-2 gets you this!

xentr_thread_starter
I have VERY recent experience that was similar to this with crap results (last week).

My e2180 went from 2.0 to 2.7 on stock volts, but took 1.48 volts Vcore to get to 3.0, and it wasnt even orthos stble there.

So just because it goes up 20% easily doesnt mean it'll do 21% at all...

but yeah, I am reaching for as high as I can go here...
 
looks like a nice E6750 though

Yea I guess once you hit the wall thats it really. It seems that "top" stock (1.35) gives you a pretty good idea of where the chip will get to..after that.........

Anyway I think 3.6 at 1.35 is do-able, thats where I am right now although Im close to 60oc after running Orthos so Ive never gone higher.

Your cooling is better than mine (scythe with 1 fan) so you should get higher. There are quite a few reports of these chips breaking through 3.8 now without too much effort....especially on P5KE boards:biggrin:
 
xentr_thread_starter
magictorch said:
Yea I guess once you hit the wall thats it really. It seems that "top" stock (1.35) gives you a pretty good idea of where the chip will get to..after that.........

Anyway I think 3.6 at 1.35 is do-able, thats where I am right now although Im close to 60oc after running Orthos so Ive never gone higher.

Your cooling is better than mine (scythe with 1 fan) so you should get higher. There are quite a few reports of these chips breaking through 3.8 now without too much effort....especially on P5KE boards:biggrin:
Click to expand...

here's to hoping!

Check out that sexy all copper ninja on the NCIX sale page, the fixed the heatpipe spacing on it as well, geekpr0n
 
yea the sythe ultra copper looks nice

Yes i saw that earlier and was wondering how much better it performs. I hope they have a backplate for it as i dont like the push pins when using the heavier NF-P12 fans.

Ive got another NF-P12 coming and I think the heat-sink will just fall out the board!
 
E6400 stock clocked.
With the stock intel cooler, she ran at 39C idle
With the TRUE and a single YL Im down to 28C

Room temp is 22C and until I get my new case stand, my P180 is 4 inches from the baseboard heater. So 6C over ambient being extremely close to a heat source, Im pleased.

After a few days the thermal compound should settle and a consistent temp should be obtainable.
 
hmm i was thinking of getting ultra 120 with noctuas for the e8400. but i noticed noctua has the NH-U12P. saves me a bit of cash, would there be much performance difference ?
 
You must log in or register to reply here.

Latest posts

xentr_legal_notice_title

xentr_legal_notice_description

Back
Top