System Light Dark

xentr_theme_editor

xentr_page_setup xentr_appearance xentr_sidebar

  • xentr_page_width

    xentr_toggle_page_width

    xentr_page_width_description

    xentr_color_pickers

    xentr_toggle_color_picker

    xentr_toggle_color_picker_description

    xentr_typography

    xentr_select_the_font_you_want_to_use

    xentr_node_layout

    xentr_grid_layout

    xentr_grid_layout_description

  • Style variation

    xentr_select_the_style_variation_you_want_to_use
    System Light Dark

  • xentr_sidebar

    xentr_toggles_sidebar

    xentr_sidebar_description

    xentr_sticky_sidebar

    xentr_sticky_sidebar_description
    xentr_sidebar_position
    Left
    Right
  • Please do not post any links until you have 3 posts as they will automatically be rejected to prevent SPAM. Many words are also blocked due to being used in SPAM Messages. Thanks!

BSOD When Opening Heaven or Valley

xentr_thread_starter
Alrighty. Looks like I have to find a cheap set of DDR4 RAM. I had 4x4GB of Kingston Predator 1866 and it worked on my UD4 board no problem. Ive felt so gutted the last 24 hours that I hope its not the board.
 
xentr_thread_starter
KaptCrunch said:
i'd check the cpu socket for misaligned pins and check all ram slots connectors

are sprung and not flatten
Click to expand...

I checked the CPU socket thoroughly and didnt find any bent pins. Ill look into the ram slot connectors next.

In the meantime, Im going to try and source a cheap ram kit to see if it posts with four sticks.
 
xentr_thread_starter
I didn't want to start a new thread so I figured I'd ask for help here.

I finally got my build together and tried to run Heaven and Valley to start overclockin the cards and I get a BSOD every time I try to open either of them. What could be the cause of that? My RAM issue still hasn't been solved. I've noticed the whole system seems a tiny bit laggy than normal. I ran a system file check and it came back with corrupted files, but it couldn't find a fix for them. Should I do a fresh install of Windows and start from scratch again?

GPU 1 is showing rarely any usage in Afterburner. GPU 2 is the one carrying all the load. I thought maybe I fried the card with the leak I had in my loop, but the leak was in GPU 2 spot not GPU1, so I don't know whats going on. Crossfire is enabled in Crimson, so I'm not sure what the issue is. I've reinstalled AMD drivers 3 or 4 times already.
 
Last edited:
BSOD in a 3D app usually means the video memory has an issue. Remove one card and test them one by one.
 
xentr_thread_starter
MARSTG said:
BSOD in a 3D app usually means the video memory has an issue. Remove one card and test them one by one.
Click to expand...

Well, I tore apart my loop, fresh installed Windows 7 and reinstalled the old coolers and tested both cards. Both cards work perfectly fine on there own.

I think I've experienced more problems with this new build than all the builds I've ever done combined. It makes me want to quit this hobby. lol

Any other suggesstions? I tried downloading the latest hotfix drivers from AMD, but it says it cannot detect the hardware, so I'm stuck with the up to date non-hotfix drivers.

sfc_scannow still brings up corrupted files, but cannot fix them.

I'm starting to lose hope...
 
You must log in or register to reply here.

Latest posts

xentr_legal_notice_title

xentr_legal_notice_description

Back
Top