discussion DDR3 anyone?

[mrlie3]

Has anyone bought DDR3 RAM yet? If so, please share your experience with them compare to DDR2 RAM!

 

[zaqu]

i thought they only had the motherboards out and not the the ram but if anyone does have it it i would also much appreciate input

 

[Babrbarossa]

DDR3 has looser timings and is more expensive, but the loose timings don't seem to be as detrimental as people thought- combined with the p35 chipset, and set to reasonably high frequencies, DDR3 seems to perform VERY well, even with looser timings. They are still expensive though, and with DDR2 so cheap, it's hard to justify the extra expense, especially when over the next couple of months, faster timings and lower pricing will become available.

 

[Deathspawner]

They are still expensive though, and with DDR2 so cheap, it's hard to justify the extra expense

That sums things up perfectly. You can get a solid 2GB DDR2 kit for $150, or a sub-par DDR3 kit for $300 and not notice a single difference, real-world. Not worth it at this point in time unless you need to run 1:1 ratio with the upcoming 1333FSB processors.

 

[vblanche]

You can get a solid 2GB DDR2 kit for $150

What would you recommend? thanks :thumb:

 

[3oh6]

What would you recommend? thanks :thumb:

without a doubt...

http://www.ncix.com/products/index....KIT12864AA1065&manufacture=CRUCIAL TECHNOLOGY

these have been yo-yo'ing up and down from $150~$190 so grab them when they are down. very solid kits with no surprises. HTH

 

[Eldonko]

I agree, and the pc8000 kits clock very well too. Killer binning for GMH.

 

[vblanche]

without a doubt...

http://www.ncix.com/products/index....KIT12864AA1065&manufacture=CRUCIAL TECHNOLOGY

these have been yo-yo'ing up and down from $150~$190 so grab them when they are down. very solid kits with no surprises. HTH

Done...:biggrin: