System Light Dark

xentr_theme_editor

xentr_page_setup xentr_appearance xentr_sidebar

  • xentr_page_width

    xentr_toggle_page_width

    xentr_page_width_description

    xentr_color_pickers

    xentr_toggle_color_picker

    xentr_toggle_color_picker_description

    xentr_typography

    xentr_select_the_font_you_want_to_use

    xentr_node_layout

    xentr_grid_layout

    xentr_grid_layout_description

  • Style variation

    xentr_select_the_style_variation_you_want_to_use
    System Light Dark

  • xentr_sidebar

    xentr_toggles_sidebar

    xentr_sidebar_description

    xentr_sticky_sidebar

    xentr_sticky_sidebar_description
    xentr_sidebar_position
    Left
    Right
  • Please do not post any links until you have 3 posts as they will automatically be rejected to prevent SPAM. Many words are also blocked due to being used in SPAM Messages. Thanks!

need a heavy duty monitor riser.

Marzipan

Marzipan

Well-known member
Joined
Nov 21, 2007
Messages
16,212
Reaction score
6,805
Age
46
Location
Prince Rupert, British Columbia, Canuckistan
xentr_thread_starter
I want to put a monitor riser on my desk that an support the weight / tension that my mount holding two Dell U3515w will have.

any suggestions on where to look?

I'm thinking I'll probably have to make something custom...but decided to check if there's anything available out of box.
 
xentr_thread_starter
My mount is two articulating arms and the current high limitations make it so the bottom display sits on the desk with the other arm having enough to hold the other just above the one below. It wastes a lot of space and I'd like to recover that for use.
 
This might be a better solution for that problem.

VIVO Height Adjustable VESA Adapter Accessory Bracket Kit for Individual Monitor up to 27 inch Screen (Stand-VAD3): Amazon.ca: Electronics

VIVO Height Adjustable VESA Adapter Accessory Bracket Kit for Individual Monitor up to 27 inch Screen (Stand-VAD3): Amazon.ca: Electronics
www.amazon.ca

in theory mount one to each monitor and raise them up higher using the bracket. I have not usedon myself but I was looking at something similar since i need to mount these 4k displays upside down due to the weird VESA mounting point to get the height I want.
 
xentr_thread_starter
well. worst case scenario is that I have to buy two wall mounts and then stack them vertically that way. not only does it free up the desk space, but it gives me height, so it's not just low lying items that can be put there. honestly, that's probably the best solution.

/me goes off to look at in expensive / simple articulating arm wall mounts...
 
Mr. Friendly said:
well. worst case scenario is that I have to buy two wall mounts and then stack them vertically that way. not only does it free up the desk space, but it gives me height, so it's not just low lying items that can be put there. honestly, that's probably the best solution.

/me goes off to look at in expensive / simple articulating arm wall mounts...
Click to expand...

Why expensive? Just get an el cheapo tv mount. I have one that was under $40 new from CC that was designed for 27-40" TVs, it holds a monitor easily and it's probably tough enough that i could hang off it too without issues. Worth a look?
 
PrincessAuto usually carries a good selection of cheap wall mounts, PrimeCables and a few others as well with full range of motion.
 
You must log in or register to reply here.

Latest posts

xentr_legal_notice_title

xentr_legal_notice_description

Back
Top