What's new
  • Please do not post any links until you have 3 posts as they will automatically be rejected to prevent SPAM. Many words are also blocked due to being used in SPAM Messages. Thanks!

New WC Case and new to the board

sswilson

Moderator
Staff member
Joined
Dec 9, 2006
Messages
17,864
Location
Moncton NB
I see your pimping that PSU now:D
The PCP&C psu is solid one of the best you can buy.
I have done some work on a clear case like that and dear god dont touch the inside of the case without wearing gloves. In time you will see every smudge and fingerprint as dust settles on it.

And Welcome to the forums man hang around.:D
Heh.... I saw 2X 8800GTX and alarm bells went off....... :)
 

sizerkozak

Well-known member
Joined
Dec 26, 2006
Messages
87
Location
Oshawa Ontario
Woot...today i moved everything around to its proper locations and its now running a leak test !!

So far no leaks !!

If it goes well over night then tommorow morning i can get the electrical done and maybe even get an OS installed Saturday !!
 

sswilson

Moderator
Staff member
Joined
Dec 9, 2006
Messages
17,864
Location
Moncton NB
What did you decide on for a PS?

Be sure to post a pic or two when you get everything up and running.
 

sswilson

Moderator
Staff member
Joined
Dec 9, 2006
Messages
17,864
Location
Moncton NB
Sweet!!!!

Yeah, you won't need another PSU until the next major spec change (like the change from the 5 & 3v lines needing the most juice).

The other benefit is that a strong PSU doesn't need to produce as much heat to do the work.
 

sizerkozak

Well-known member
Joined
Dec 26, 2006
Messages
87
Location
Oshawa Ontario
Well...its now 10am and no leaks !!
( i stayed up way to late and did all the electrical work )
Pump, fans and lights are all controlled using the front 5 1/2" drive bay controller.
Now to mount the drive and then ill post some pics
 

sizerkozak

Well-known member
Joined
Dec 26, 2006
Messages
87
Location
Oshawa Ontario
Update and pics

Well im now ready to toss on an OS...wish Vista 64 was out :(

Things i have left to do are:

Install Hard Drive cooler
Install the 8" x 8" x 19" Arcylic air chamber (mount the pump and rad inside)
Swap the PSU with a PCpower 1000 watter (on order)
Install the other 2gig or ram (on order)
Install the 2nd 8800 (on order)
Swap the side Arcylic cover with a UV one (Dragon etched)
install the TripleHead2go (on order)
Buy three 19"Lcd's for the TripleHead2go
(need to find monitors with the smallest possible edges)
*Maybe* add a Bigfoot Networks Killer Gaming Nic
*Maybe* add a X-Fi Xtreme Gamer sound card

Anyways here are a few pics




 

Twitter

Top