G
ya I understand It just looks like shit, he's a smoker so it was bad after 6 months.^^^ Thanks
Its almost impossible not to touch that case...ive had to drill so many holes in it already...ive given up on the gloves
Nice rig BTW
New WC Case and new to the board
- Thread starter sizerkozak
- Start date
Nice rig BTW
I see your pimping that PSU now
The PCP&C psu is solid one of the best you can buy.
I have done some work on a clear case like that and dear god dont touch the inside of the case without wearing gloves. In time you will see every smudge and fingerprint as dust settles on it.
And Welcome to the forums man hang around.
Heh.... I saw 2X 8800GTX and alarm bells went off.......
Woot...today i moved everything around to its proper locations and its now running a leak test !!
So far no leaks !!
If it goes well over night then tommorow morning i can get the electrical done and maybe even get an OS installed Saturday !!
So far no leaks !!
If it goes well over night then tommorow morning i can get the electrical done and maybe even get an OS installed Saturday !!
What did you decide on for a PS?
Be sure to post a pic or two when you get everything up and running.
Be sure to post a pic or two when you get everything up and running.
G
Sick
You'll be very happy with that PSU, got a MM I'd like to see how the rails are with a decent power hungry rig, see how little it flux's.
You know I want to kill you and take your rig right?
Sweet!!!!
Yeah, you won't need another PSU until the next major spec change (like the change from the 5 & 3v lines needing the most juice).
The other benefit is that a strong PSU doesn't need to produce as much heat to do the work.
Yeah, you won't need another PSU until the next major spec change (like the change from the 5 & 3v lines needing the most juice).
The other benefit is that a strong PSU doesn't need to produce as much heat to do the work.
Well...its now 10am and no leaks !!
( i stayed up way to late and did all the electrical work )
Pump, fans and lights are all controlled using the front 5 1/2" drive bay controller.
Now to mount the drive and then ill post some pics
( i stayed up way to late and did all the electrical work )
Pump, fans and lights are all controlled using the front 5 1/2" drive bay controller.
Now to mount the drive and then ill post some pics
Update and pics
Well im now ready to toss on an OS...wish Vista 64 was out
Things i have left to do are:
Install Hard Drive cooler
Install the 8" x 8" x 19" Arcylic air chamber (mount the pump and rad inside)
Swap the PSU with a PCpower 1000 watter (on order)
Install the other 2gig or ram (on order)
Install the 2nd 8800 (on order)
Swap the side Arcylic cover with a UV one (Dragon etched)
install the TripleHead2go (on order)
Buy three 19"Lcd's for the TripleHead2go
(need to find monitors with the smallest possible edges)
*Maybe* add a Bigfoot Networks Killer Gaming Nic
*Maybe* add a X-Fi Xtreme Gamer sound card
Anyways here are a few pics
Well im now ready to toss on an OS...wish Vista 64 was out
Things i have left to do are:
Install Hard Drive cooler
Install the 8" x 8" x 19" Arcylic air chamber (mount the pump and rad inside)
Swap the PSU with a PCpower 1000 watter (on order)
Install the other 2gig or ram (on order)
Install the 2nd 8800 (on order)
Swap the side Arcylic cover with a UV one (Dragon etched)
install the TripleHead2go (on order)
Buy three 19"Lcd's for the TripleHead2go
(need to find monitors with the smallest possible edges)
*Maybe* add a Bigfoot Networks Killer Gaming Nic
*Maybe* add a X-Fi Xtreme Gamer sound card
Anyways here are a few pics
Idle temp right now is:
CPU 42
System 37
GPU 63
seems a little high doesnt it?
here is what cpuz reported if this helps
CPU 42
System 37
GPU 63
seems a little high doesnt it?
here is what cpuz reported if this helps
xentr_legal_notice_title
xentr_legal_notice_description