System Light Dark

xentr_theme_editor

xentr_page_setup xentr_appearance xentr_sidebar

  • xentr_page_width

    xentr_toggle_page_width

    xentr_page_width_description

    xentr_color_pickers

    xentr_toggle_color_picker

    xentr_toggle_color_picker_description

    xentr_typography

    xentr_select_the_font_you_want_to_use

    xentr_node_layout

    xentr_grid_layout

    xentr_grid_layout_description

  • Style variation

    xentr_select_the_style_variation_you_want_to_use
    System Light Dark

  • xentr_sidebar

    xentr_toggles_sidebar

    xentr_sidebar_description

    xentr_sticky_sidebar

    xentr_sticky_sidebar_description
    xentr_sidebar_position
    Left
    Right
  • Please do not post any links until you have 3 posts as they will automatically be rejected to prevent SPAM. Many words are also blocked due to being used in SPAM Messages. Thanks!

show your neat n tidy desktop networking and power wiring

double sided gorilla tape they make it clear and brown. clear hold 15 pounds and brown holds 30 I use the stuff all over my house super strong and comes off good when you need it too
 
The 3m Velcro tape works amazingly well. And you can move stuff around After. Dual lock I think it’s called, can get smaller chunks at Walmart

panduit d-clips are great too.
 
If you have a printer, these could work (designed to go onto command strips/double sided tape.
www.thingiverse.com

Cable Clip by enkoopa

2022 - Remix'd my own design, added a hole for the option to use a #6 screw. Or, you can still use a command strip. https://www.thingiverse.com/thing:5179938Cable clip. Flat surface will fit 3M Command Strips.Print on the side - probably use a raft or you'll have a bad time.
www.thingiverse.com www.thingiverse.com
 
My current desk has one of those supports across the back which I'd normally call a shin bashing board if it was any further forward. It isn't quite flush with the rear edge of the desk though so I can push it nearly all the way against the wall and still have a bit of a void. I took 3m hooks and hung what wires I could off of them, and used the double sided picture hanging strips to mount the monitor power bricks.

I'd like to have the spare time to build a desk from scratch as I have a couple cable management ideas that could be built right into the desk and get the UPS off the floor etc
 
xentr_thread_starter
Izerous said:
My current desk has one of those supports across the back which I'd normally call a shin bashing board if it was any further forward. It isn't quite flush with the rear edge of the desk though so I can push it nearly all the way against the wall and still have a bit of a void. I took 3m hooks and hung what wires I could off of them, and used the double sided picture hanging strips to mount the monitor power bricks.

I'd like to have the spare time to build a desk from scratch as I have a couple cable management ideas that could be built right into the desk and get the UPS off the floor etc
Click to expand...
yeh...that's what my desk has too...but I've never come close to bashing myself on it. that's what I'm going to connect all my gear too...including the power strip my Tripp Lite rep just said he's sending me grata. :D
 
We used to have some in the office where the support was in about the middle of the desk which is where I got the nick name from. So many bruises on my shins from those desks.
 
You must log in or register to reply here.

Latest posts

xentr_legal_notice_title

xentr_legal_notice_description

Back
Top