System Light Dark

xentr_theme_editor

xentr_page_setup xentr_appearance xentr_sidebar

  • xentr_page_width

    xentr_toggle_page_width

    xentr_page_width_description

    xentr_color_pickers

    xentr_toggle_color_picker

    xentr_toggle_color_picker_description

    xentr_typography

    xentr_select_the_font_you_want_to_use

    xentr_node_layout

    xentr_grid_layout

    xentr_grid_layout_description

  • Style variation

    xentr_select_the_style_variation_you_want_to_use
    System Light Dark

  • xentr_sidebar

    xentr_toggles_sidebar

    xentr_sidebar_description

    xentr_sticky_sidebar

    xentr_sticky_sidebar_description
    xentr_sidebar_position
    Left
    Right
  • Please do not post any links until you have 3 posts as they will automatically be rejected to prevent SPAM. Many words are also blocked due to being used in SPAM Messages. Thanks!

This thermal paste reviewed by igorslab looks to be pretty good.

CMetaphor said:
My goto for ages was Gelid GC extreme actually. Came in a little jar, unscrew the cap, paste was dense as hell, and had to be applied using a cool mini plastic trowel onto cpus. Worked better than everything else I have/had, but admittedly I don't have the latest MX4s and whatnot. Generic Noctua and similar stuff was worse than the Gelid stuff though, probably because of that density.

Only got the kyronaut stuff for repasting gpus (when im feeling EXTRA brave to do it), but maybe I'll give it a try on my main gamer upgrade too.

Question is, what thickness pads? I *think* the ones I got were 0.2mm, which sounds right to me, IDk 🤷‍♂️
Click to expand...

AFAIK, each model has specific thickness' which vary, and I believe some even have more than one different thickness' on the same block.
 
sswilson said:
AFAIK, each model has specific thickness' which vary, and I believe some even have more than one different thickness' on the same block.
Click to expand...
Know that much for GPUs, but I was referring to pad thickness for CPUs. My gelid stuff had to be troweled pretty thin to not squeeze off the sides, so im thinking 0.2mm is actually pretty dam close to a typical AMD paste thickness.
 
xentr_thread_starter
CMetaphor said:
My goto for ages was Gelid GC extreme actually. Came in a little jar, unscrew the cap, paste was dense as hell, and had to be applied using a cool mini plastic trowel onto cpus. Worked better than everything else I have/had, but admittedly I don't have the latest MX4s and whatnot. Generic Noctua and similar stuff was worse than the Gelid stuff though, probably because of that density.

Only got the kyronaut stuff for repasting gpus (when im feeling EXTRA brave to do it), but maybe I'll give it a try on my main gamer upgrade too.

Question is, what thickness pads? I *think* the ones I got were 0.2mm, which sounds right to me, IDk 🤷‍♂️
Click to expand...
I seen a few video's on youtube and they were doing gpu's and replacing the thermal pads with better ones,ifI can find the video's I seen I will link them to you.

From what I seen in the video's if you went with a decent brand thermal pad the higher the Watt rating that they could handle all of them did and about 12 were tested.

If you want I ordered this multi pack so I would have different thickness's for my ssd enclosure's and I'd be happy to mail you one of each so when you take your gpu apart you could use these ones to compare what came with your gpu as stock to help you,that way you could compare them and then just order new ones and amazon has lot's of good replacement brands to choose with much better ratings.

If you want me to just mail you some regular letter mail I don't mind I have plenty of extra's.

https://www.aliexpress.com/item/100...order_list.order_list_main.380.1f361802RGgqNu
 
You must log in or register to reply here.

Latest posts

xentr_legal_notice_title

xentr_legal_notice_description

Back
Top