Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Please do not post any links until you have 3 posts as they will automatically be rejected to prevent SPAM. Many words are also blocked due to being used in SPAM Messages.
Thanks!
Heh... if you haven't got the point yet..... unless you're ambient temps are < 10c something isn't adding up. Either your temp sensors are completely out of whack, or your board isn't delivering anything near to the 1.7 you say you're putting into it.
I run 1.55 under water @ 3.75G with load temps in the 55c - 60c range. Once you get to a Vcore above 1.45 - 1.5 temps no longer raise in a linear fashion, every little bump adds a disproportionate raise in core temps.
I'd expect 1.7 under air w/ normal ambient temps to be peaking at a minimum of 75c if not closer to 90c.
Until you figure out which of your readings are out of whack, you're taking a heavy chance of frying something.
I've gotten mine to 3.825 @ 1.575V, but I won't increase the voltage any more than that until I have something new sitting in a box waiting to be installed.
3.6@ 1.425V on air(TRUE) ATM,will go higher when i get my temps under control,may use my WC kit now
after vdroop im running 1.385V i believe.
My idle temps are 38-42c/ load-62-65 ...im impressed by this 100.00 chip,best monies spent yet.