System Light Dark

xentr_theme_editor

xentr_page_setup xentr_appearance xentr_sidebar

  • xentr_page_width

    xentr_toggle_page_width

    xentr_page_width_description

    xentr_color_pickers

    xentr_toggle_color_picker

    xentr_toggle_color_picker_description

    xentr_typography

    xentr_select_the_font_you_want_to_use

    xentr_node_layout

    xentr_grid_layout

    xentr_grid_layout_description

  • Style variation

    xentr_select_the_style_variation_you_want_to_use
    System Light Dark

  • xentr_sidebar

    xentr_toggles_sidebar

    xentr_sidebar_description

    xentr_sticky_sidebar

    xentr_sticky_sidebar_description
    xentr_sidebar_position
    Left
    Right
  • Please do not post any links until you have 3 posts as they will automatically be rejected to prevent SPAM. Many words are also blocked due to being used in SPAM Messages. Thanks!

Eyefinity Clarification Thread Q&A

Eysenbeiss said:
Just to make it absolutly clear:

you can connect three monitors directly to a 5770, 5850 or 5870 if one of the connected monitors has a display port and you would need no additional adapter ?!

If so, then I would suggest that anyone, who plans on going this way, to take a look at Lenovos Thinkvision L2251p.

It has "only" 1680x1050, but you won't find another new monitor with a displayport at that price !
Click to expand...


Can anyone pls confirm that there is no need for an adapter, if one monitor has a native displayport ?
 
Has anyone tested an Crossfire X Setup after the 9.12 Hotfix ?

I was wondering, if you still have to connect one monitor to the displayport of the main card, or if it would be possible to use one of those two additional dvi-ports on the second card, to create a 3-Monitor-Setup ?!
 
xentr_thread_starter
Eysenbeiss said:
Has anyone tested an Crossfire X Setup after the 9.12 Hotfix ?

I was wondering, if you still have to connect one monitor to the displayport of the main card, or if it would be possible to use one of those two additional dvi-ports on the second card, to create a 3-Monitor-Setup ?!
Click to expand...

Interesting possibility, but i highly doubt it unfortunately. Normally the second (and beyond) card in a CrossfireX setup of SLI setup does not use any of it ports, DVI or otherwise. I can't tell for sure since I have yet to try that configuration. I'll let you know once my monitors arrive, I can try a mixed CF 5970 + 5870 combo for Eyefinity and see if it works and how well. I'll post back again with results. :thumb:
 
I am pretty sure that I read only one card is using it's outputs in a Crossfire+Eyefinity config. Meaning you have to use the Displayport.
 
Last edited:
Seems that I am just too stupid to get it to work.

I now have two BenQ G2220HD and one Lenovo Thinkvison L2251p
The two BenQ are capable of 1920x1200, cause they are 16:9 and the Lenovo comes with 1680x1050.

The two BenQ Monitors are connected via DVI and the Lenovo directly to the Displayport and yes, the BenQs are running 1680x1050 as well, cause that stupd driver doesn't support 16:9 modes, at least not the higher ones.

Still, I can't activate all three Monitors in the damn CCC, one always remains deactivated and if I try to pull it up, I only get the option to swap both Monitors around.

I installed the 9.12 hotfix Version of those f****d up drivers, but it just won't work and it doesn't even look like that CCC that this stupid Bill Donnelly is using in the Video.

Does anyone have a hint or link that might be helpfull ?
 
Eysenbeiss said:
Seems that I am just too stupid to get it to work.

I now have two BenQ G2220HD and one Lenovo Thinkvison L2251p
The two BenQ are capable of 1920x1200, cause they are 16:9 and the Lenovo comes with 1680x1050.

The two BenQ Monitors are connected via DVI and the Lenovo directly to the Displayport and yes, the BenQs are running 1680x1050 as well, cause that stupd driver doesn't support 16:9 modes, at least not the higher ones.

Still, I can't activate all three Monitors in the damn CCC, one always remains deactivated and if I try to pull it up, I only get the option to swap both Monitors around.

I installed the 9.12 hotfix Version of those f****d up drivers, but it just won't work and it doesn't even look like that CCC that this stupid Bill Donnelly is using in the Video.

Does anyone have a hint or link that might be helpfull ?
Click to expand...

Which monitor never shows up? Is it always the same one?
 
You must log in or register to reply here.

Latest posts

xentr_legal_notice_title

xentr_legal_notice_description

Back
Top