- Location
- Grande Prairie, AB
Just an FYI. If you mount a network cabinet upside down, it takes about 200 pounds for the hinge pin to sheer off.
When I did it, there weren't any loose fibres floating around. More of a chunk kind of stuff. But I really don't know.I'm surprised blowing in fiberglass is even a thing, especially something they let anyone do with a rental machine. Seems like an easy way to cause lung damage...
Was the cat cut? They just leave everything dangling and dragging when they do that. Exhaust noise would have been a dead giveaway. Could hear my "catless straight piped" 4G69 from blocks away when it happened to me.When I did it, there weren't any loose fibres floating around. More of a chunk kind of stuff. But I really don't know.
When it rains, it pours. My wife came home this morning with our exhaust hanging off, so off to our local guys, hopefully this bill is not too bad. This Christmas has become a very expensive one.
| Thu. Oct. 30, 2025 - 1:19 a.m. | ETOBICOKE, ON | Departed sort facility |
| Thu. Oct. 30, 2025 - 1:19 a.m. | ETOBICOKE, ON | Departed sort facility |
| Thu. Oct. 30, 2025 - 1:17 a.m. | ETOBICOKE, ON | Arrived at sort facility |
| Thu. Oct. 30, 2025 - 1:16 a.m. | ETOBICOKE, ON | Picked up by Purolator |
| Wed. Oct. 29, 2025 - 5:06 p.m. | PUROLATOR | Label information electronically submitted |
No, it wasn't an attempt to steal the Cat; just an 8-year-old car and only the muffler broke off. The car is still pretty quiet. I noticed a different sound, the wife couldn't really tell.Was the cat cut? They just leave everything dangling and dragging when they do that. Exhaust noise would have been a dead giveaway. Could hear my "catless straight piped" 4G69 from blocks away when it happened to me.
Depending on how and where it is broken an exhaust band clamp might be enough for that purpose. Would only work if there is enough piping still attached etc., I am going to take a look at it tonight once I get it home to see if I can make it safe to drive.
Ya, that was my thoughts too, when just looking under the car, I think it broke right on a 90 bend.Depending on how and where it is broken an exhaust band clamp might be enough for that purpose. Would only work if there is enough piping still attached etc.
General PDP Template
www.canadiantire.ca
xentr_legal_notice_description