System Light Dark

xentr_theme_editor

xentr_page_setup xentr_appearance xentr_sidebar

  • xentr_page_width

    xentr_toggle_page_width

    xentr_page_width_description

    xentr_color_pickers

    xentr_toggle_color_picker

    xentr_toggle_color_picker_description

    xentr_typography

    xentr_select_the_font_you_want_to_use

    xentr_node_layout

    xentr_grid_layout

    xentr_grid_layout_description

  • Style variation

    xentr_select_the_style_variation_you_want_to_use
    System Light Dark

  • xentr_sidebar

    xentr_toggles_sidebar

    xentr_sidebar_description

    xentr_sticky_sidebar

    xentr_sticky_sidebar_description
    xentr_sidebar_position
    Left
    Right
  • Please do not post any links until you have 3 posts as they will automatically be rejected to prevent SPAM. Many words are also blocked due to being used in SPAM Messages. Thanks!

Will my water cooling system handle the load ?

B

bc_tileguy

Banned
Joined
Apr 30, 2009
Messages
148
Reaction score
0
Location
Campbell River B.C
xentr_thread_starter
hi guys

I would like your guys input , i ordered a 5870 /EK block to add to my loop , so there will be a q9650 @ 4.0ghz a 5970 @ 1000/1350 and a 5870 @ around 1000/1350
all in the same loop with a laing 655 with a EK top and a thermalchill 120.3 and a feser one 120.1 with 4 [FONT=Verdana, Arial, Helvetica, sans-serif]http://ncix.com/products/index.php?sku=27129&vpn=NF-P12-1300&manufacture=Noctua fans

do you guys think this system will handle the load ?

or should i sell the single feser one rad and get another triple rad ?

what do you guys think ?

thanks for your input


:thumb:
[/FONT]
 
The system, as-is, will handle the load. Your temps are certainly going to be warmer than the norm, but none of them should be anywhere near their respective red-zones (although the CPU may get close, depending on how hot it runs at that speed). If you have the space and funds, this is a situation where switching in a triple rad for a single may net you a few degrees improvement under full-load (although I wouldn't expect any improvement at idle). But personally, I'd have no qualms about running your system as-is. For system setup, the important thing will be to try and give each radiator fresh air.
 
xentr_thread_starter
ok thanks for the reply , yup right know my temps are great :thumb: cpu at around 42-43 c under load and the 5970 at around 33-34c under load , i will just add a couple more fans , and it should be fine

i will report back when it is up and running
 
hi i'm traying to do the same with better water cooling stuff, i'm using the TT water cooling that come with the Kandalf case. It is not bad it seems to be cooling the CPU very well but want to overclock my q9550 mor than 3.8 and to keep the sysytem satble.
i am replacing the stock Radiator with a Swiftech Q320 (the only one that can fit) with my Slinex fans, the CPU water block with EK supreem HF the NB shipset and the SB shipset and bothe Moff on my P5K Premium and watercooling my GT8800 too, do i have to byu the mcp655 or the mcp355 !! both with aftermarket tpo ? thank you for your help
 
Not exactly the same setup but I run a core i7 860 @ 4.0 GHz with HT on and 2 5850's running off a GTX480 rad / MCP655. Linx the cpu core hits 62 C and my 5850's never go over 34C GPU 36C vram and my rad is very dusty in the fin area too. I'll clean it this weekend and the temps will be slightly better.
 
Personally, I would want more rad. Your cooling three GPUs and s CPU. If your temps are good, that great :thumb: I just like my temps to be a little cooler than that.
 
You must log in or register to reply here.

Latest posts

xentr_legal_notice_title

xentr_legal_notice_description

Back
Top