System Light Dark

xentr_theme_editor

xentr_page_setup xentr_appearance xentr_sidebar

  • xentr_page_width

    xentr_toggle_page_width

    xentr_page_width_description

    xentr_color_pickers

    xentr_toggle_color_picker

    xentr_toggle_color_picker_description

    xentr_typography

    xentr_select_the_font_you_want_to_use

    xentr_node_layout

    xentr_grid_layout

    xentr_grid_layout_description

  • Style variation

    xentr_select_the_style_variation_you_want_to_use
    System Light Dark

  • xentr_sidebar

    xentr_toggles_sidebar

    xentr_sidebar_description

    xentr_sticky_sidebar

    xentr_sticky_sidebar_description
    xentr_sidebar_position
    Left
    Right
  • Please do not post any links until you have 3 posts as they will automatically be rejected to prevent SPAM. Many words are also blocked due to being used in SPAM Messages. Thanks!

Let's go Team !!

Attached is the ATX form factor lay-out, I'll update tomorrow with the SWTX form factor.
I have also added the ATX specification data.

7034e03f7b17e9d5.jpg
 
Last edited:
And here is the SWTX form factor. Dimensions were taken from both the board and papertrace layout I did to locate the missing studs.

Upper 3 holes + single hole in the middle (in line with the i/o back panel) are for SWTX. All others match the ATX form factor.
 
Last edited:
3.0charlie said:
And here is the SWTX form factor. Dimensions were taken from both the board and papertrace layout I did to locate the missing studs.

Upper 3 holes + single hole in the middle (in line with the i/o back panel) are for SWTX. All others match the ATX form factor.
Click to expand...

Exactly what I needed. Thanks. Time to buy some more aluminum :bananafunky:
 
Hopefully the dims are close enough. Ain't easy to take 'em on either the board itself (with a plastic ruler) or on the papertrace... the only hole that I'm not convinced is the same middle one, in line with the i/o panel.

The other holes are EATX-compliant (lower + the one at 11.11). The top 3 are SWTX only.
 
I'm just looking at other team stats.. If I were on [H], i'd only be #5 in avg daily PPD. That team is crazy.
 
So you guys w/ the 48-core rigs, what kind of heat do these babies put out? You think that a single 3x120mm radiator will be able to maintain decent temps w/ three medium speed fans? I am ripping apart my stacker to get it to fit an SWTX board right not. Just not sure what I should do for radiator holes.
 
Rison said:
Are there waterblocks that fit the G34 socket?
Click to expand...

Koolance CPU-360/370 do w/ the G34 screws (like an extra $3). If I am going to have to spend $60 each on heatsinks I might as well spend an extra $60 to get waterblocks. I have so many damn radiators, pumps, and reservoirs around, blocks would be my only cost.
 
lowfat said:
So you guys w/ the 48-core rigs, what kind of heat do these babies put out? You think that a single 3x120mm radiator will be able to maintain decent temps w/ three medium speed fans? I am ripping apart my stacker to get it to fit an SWTX board right not. Just not sure what I should do for radiator holes.
Click to expand...

My four 6168s pull about 575 watts from the wall. Right now my SR-2 at 3.8Ghz is probably using the same or maybe a bit less with two x5650s.
 
You must log in or register to reply here.

Latest posts

xentr_legal_notice_title

xentr_legal_notice_description

Back
Top