System Light Dark

xentr_theme_editor

xentr_page_setup xentr_appearance xentr_sidebar

  • xentr_page_width

    xentr_toggle_page_width

    xentr_page_width_description

    xentr_color_pickers

    xentr_toggle_color_picker

    xentr_toggle_color_picker_description

    xentr_typography

    xentr_select_the_font_you_want_to_use

    xentr_node_layout

    xentr_grid_layout

    xentr_grid_layout_description

  • Style variation

    xentr_select_the_style_variation_you_want_to_use
    System Light Dark

  • xentr_sidebar

    xentr_toggles_sidebar

    xentr_sidebar_description

    xentr_sticky_sidebar

    xentr_sticky_sidebar_description
    xentr_sidebar_position
    Left
    Right
  • Please do not post any links until you have 3 posts as they will automatically be rejected to prevent SPAM. Many words are also blocked due to being used in SPAM Messages. Thanks!

WC project and need source for part source

AkG

AkG

Well-known member
Joined
Oct 24, 2007
Messages
5,270
Reaction score
0
xentr_thread_starter
Does anyone know of a Canadian retailer who has either the D-TEK FuZion in stock or the Swiftech Apogee GTX's copper housing? I'm putting together a WC kit to cool off my fireball 9450(1.16v @ 400FSB = 50°C on idle 62°C load w/ Ultima 90 + Nocuta P12). Needless to say its time to step backinto the wonderful world of WC'ing...and I though I had kicked the habit ;)

Anyways here is what I thinking as a simple little loop:
Fuzion or GTX w/copper top CPU block
mcp655 (though I might drop down to a Dtek DB1 for lower noise)
MCR220 dual rad w/ res built in
rad box
tygon 1/2 ID tubing
d-tel High flow g1/4 barbs
fesser one non conductive coolant (might drop this)
4 Noctua p12s in push pull config.
and enough steel worm hose clamps

I've gotten everything else sourced w/ ncix but that darn Dtek! HELP!:bleh:
 
xentr_thread_starter
I would love to go triple rad (or heck a double thermochill ) but the case is a CM690 and dual swiftech rad is about as big as i can go. As for the yate loons...to noisy (used them in the past) and the Noctua NF-P12s are quiet and have kick ass static pressure.

Thanks for the link, but I tried there already and they are "not available" right now. I'll keep an eye DC but am not too hopeful. Dteks seem to be getting hard to find :(
 
Reply

WARNING: Aluminum+Copper=Corrosion

I too would upgrade to a MCR320, and get a separate reservoir which in turn would improve liquid flow. Also let me tell you this, Noctuas are not necessary instead settle for some Scythe S-Flex's. The Scythe's perform on par, are cheaper by about $7 bucks per fan(7x3fans=$21), and also look MUCH better.

EDIT: NVM about the MCR320...
 
xentr_thread_starter
I use Scythe's all the time (especially in my reviews) and Scythe Fs are extremely loud when compared to Noctua's; worse they are not as good when it comes to static pressure. Minor Price dif not much of a concern, noise levels number 1 concern (after lower temps). I'll probably upgrade the case and the rad to a thermochill + p182 later, right now short term not too worried about corrosion.
 
I emailed Linus @ NCIX and he said he should be getting some Fusions in the next week or so. As for the copper top for the GTX, it would be special order, a couple weeks at best.
 
xentr_thread_starter
Sweet! Thanks Cptn Vortex. I hate settling for 2nd best if I don't need to ;)
 
Yeah I know. Thinking of upgrading to the Fusion, just for the heck of it. However I now see the XSPC Delta block, and it looks darn Nice. I might see if I can get my hands one one....
 
You must log in or register to reply here.

Latest posts

xentr_legal_notice_title

xentr_legal_notice_description

Back
Top