Yeah thats true eh, I just figured that the noctua had to be stronger and better than the stock one just cause its a noctua lol
3D Printer Essentials? (Or maybe better named as "Adventures in Newb 3D Printing" )
- Thread starter sswilson
- Start date
10mm thk fan = clog
20 mm thk fan = no clog.
been using the 20 mm on my direct drive upgrade with no issues, same too on my previous bowden setup.
20 mm thk fan = no clog.
been using the 20 mm on my direct drive upgrade with no issues, same too on my previous bowden setup.
I mean I guess as long as your strapping some 90db delta screamer to it should be fine 
The noctua i ordered has 5000/4400/3700rpm speeds, I cant find specs on the stock fan but something tells me im gonna be ok.
Noctua should also list the CFM and static pressure as well.
Is that cooler mod one of the petfang/bullseye models?
If you're not happy with that cooler you can always try the petsfang referred to in one of those videos....
www.thingiverse.com
Petsfang Duct for CR10 MicroSwiss/Stock/E3Dv6/Volcano/TevoTornado /Tarantula Hot End/E3Dv6 CNC Mount & 5015 fan Bullseye Blokhead by dpetsel
http://www.petsfang.com/ What to print Shortcuts to the current Creality & Tevo "Files to Print" Docs is below. This takes you to an interactive spreadsheet with links to the individual files needed: http://www.dpetsel.com/files2print.html Addded a couple of modular RH mounts for 8 & 12mm...
www.thingiverse.com
Ill check that out, i was going to print the one you installed but then i found the one i printed was a bit smaller. Wrong move!
xentr_legal_notice_title
xentr_legal_notice_description